SunPumps Solar Pumps

SOLAR PUMPS

SOLAR PUMPS

301 West 12th Street l Elk City, Oklahoma 73644

Toll Free: 1-866-246-7652 l Phone: 1-580-225-1704 l Fax: 1-580-225-1120

Home Page - Products - Contact Us - Why Go Solar? - Testimonials - Typical Installations - MAP

SunPumps

is a leading manufacturer of high quality Solar Powered Water Pumping equipment, including submersible pumps, centrifugal pumps, jet pumps, triplex piston booster pumps and retrofit kits for jack pumps.

SunPumps is also a leading producer of electronic DC motor controls, specializing in Micro-Processor based pump controllers for brush-type and brushless DC motors.

SunPumps offers a complete line of Solar Water Pumping Equipment, pump accessories, solar panels and support structures.

Free design assistance for new pumping systems as well as technical support on existing Solar Pumping systems is only part of the quality service offered by SunPumps.

SDS Series DC Submersible Pumps

SunPumps SDS series submersible pumps are highly efficient, low voltage, DC powered, diaphragm type positive displacement pumps designed specifically for water delivery in remote locations. They operate on 12 to 30 volts of DC current that may be supplied from a variety of indep- endent power sources including solar panels, wind generators, batteries or any combination of the three. Power requirements can be as little as 35 watts. Constructed of marine gmde bronze and 304 stainless steel, SunPump SDS Series these pumps are the highest quality submersible pumps in their class.

D-Series (Duplex)
3.8" (96mm) O.D.
10.75" (273mm) Ht.
14 lbs. (6.4kg) Wt.
Suitable for installation in 4" (100mm) inside diameter and larger wells.
FIow rates up to 2 GPM (7.5~M), and heads up to 230 feet (70.1 meters).

SunPumps Specification/Data Sheets

SunPump SDS Series SunPumps SDS series pumps can be installed below the water level in a pond, river or cistern, or installed by hand into a ground water well. They can be used to fill an open tank or in a pressurized water delivery system. Simplicity is the key feature of the SDS series pumps. They are easy to install, require very little maintenance and are repairable. SunPumps SDS series pumps are de~igned for use in stand alone water delivery systems. They are pollution-free, corrosion-free, self- lubricating and quiet. It is the ideal way to provide water for remote homes, campsites, livestock, small farms or for many other needs beyond the commercial power grid.

Q-Series (Quad)
4.5" (114mm) O.D.
12.25" (311mm) Ht.
17.51bs. (7.9kg) Wt.
Suitable for installation in 5" (127mm) inside diameter and larger wells.
Flow rates up to 3.7 GPM (14 LPM), and heads up to 100 feet (30 meters).

SunPumps SCS Centrifugal pumps are also available as well as Solarjack pumps, parts and rebuilding services.....call for pricing.

All SunPump systems are equipped with the following standard equipment & services: Solar Powered Pump with three tanks

Solar Panel(s).
Solar Panel Rack (Top-of-Pole Aluminum rack w/Steel Capstan assembly and Stainless Steel Panel Mounting Hardware.)
Solar Powered Pump.
Solar Powered Linear Current Booster / Pump Controller with remote water sensing connections for optional tank-full cutoff.
Complete installation instructions and toll free telephone support.

Optional Items: (Accessories)

Float switches and water level sensors.
Solar Panel Interconnection Wiring Harnesses made with flexible conduit and connections. (No wires are exposed to the weather.)
½", ¾" or 1" Polyethylene Pipe.
Bleeder valve assembly. ( ½", ¾" Or 1" depending on the pump size and type ).
Well Seal Assembly (Well casing diameter must be specified when ordering and prices may vary depending on size).
Double Insulated Sunlight Resistant Submersible Pump Cable.
Pump Suspension Safety Rope.
All Stainless Steel Hose Clamps and Pump Suspension Eyebolts.

Pumps can be rebuilt for about two thirds the cost of a new pump. We offer complete rebuilding services and an exchange program. Call for details.

Call 1-866-246-7652 for current prices.

SunPump Pump Systems: (SunPump Pumps and Controllers come with a 1 year warranty) SunPumps Specification/Data Sheets

SPS-Q128-85-1 Call 1-866-246-7652 for current price.	Features a SunPumps SDS-Q-128 pump, SunPumps PCA 30-M1 Current Boosting Pump Controller, one 85 Watt Kyocera solar panel, solar panel mounting rack and wiring harnesses to connect solar panels and pump controller. The system will supply up to 2 gpm and is suitable for pumping from 0-50 feet.
SPS-Q128-130-1 Call 1-866-246-7652 for current price.	Features a SunPumps SDS-Q-128 pump, SunPumps PCA 30-M1 Current Boosting Pump Controller, one 130 Watt Kyocera solar panel, solar panel mounting rack and wiring harnesses to connect solar panels and pump controller. The system will supply up to 2 gpm and is suitable for pumping from 0-50 feet.
SPS-Q128-130-2 Call 1-866-246-7652 for current price.	Features a SunPumps SDS-Q-128 pump, SunPumps PCA-30-M1D Current Boosting Pump Controller, two Kyocera 65 watt solar panels, solar panel mounting rack and wiring harnesses to connect solar panels and the pump controller. The system will supply up to 3.7 gpm and is suitable for pumping from 0-80 feet.
SPS-Q128-170-2 Call 1-866-246-7652 for current price.	Features a SunPumps SDS-Q-128 pump, SunPumps PCA-30-M1D Current Boosting Pump Controller, two Kyocera 85 watt solar panels, solar panel mounting rack and wiring harnesses to connect solar panels and the pump controller. The system will supply up to 3.7 gpm and is suitable for pumping from 0-100 feet.
For lower flow rates and slightly lower system costs, the systems above can be configured with SDS-D-128 or SDS-D-228 pumps. Replace the Q128 in the system part number with a "D128" or "D228" when you call for pricing. For higher flow rates and the same system costs, the systems above can be configured with SDS-Q-130 (4.5 GPM) or SDS-Q-135 (5.1 GPM) pumps. Replace the Q128 in the system part number with a "Q130" or "Q135" when you call for pricing.

Call 1-866-246-7652 for current prices.